• banner-page

Consumer Electronic

  • Mobile phone built-in bracket with good elasticity, good mechanical strength and good corrosion resistance

    Mobile phone built-in bracket with good elasticity, good mechanical strength and good corrosion resistance

    Product Introduction These are mobile phone built-in brackets, made from Metal Injection Molding (MIM) process with 17-4-PH stainless steel. These components did grinding surface treatment with natural color and its roughness can be less than 0.8μm. These components even have thin wall thickness but along with good elasticity, good mechanical strength and good corrosion resistance as well. • Application Filed: Consumer electronics • Molded material: 17-4PH • Post-sintering operation...
  • Mobile phone SIM tray with good insulativity and mechanical properties

    Mobile phone SIM tray with good insulativity and mechanical properties

    Product Introduction These are mobile phone SIM tray components, made from Metal Injection Molding (MIM) process with 17-4-PH stainless steel. After grinding surface treatment, the sintered component did with Teflon surface treatment and spray insulating oil. The good mechanical properties can ensure the SIM tray can have insertion and extraction repeatedly. The specific position of the component also has good insulativity since it has sprayed with insulating oil. • Application File...
  • Mobile phone Camera Deco with non-magnetic and good ductility

    Mobile phone Camera Deco with non-magnetic and good ductility

    Product Introduction These are mobile phone camera deco components, made from Metal Injection Molding (MIM) process with P.A.N.A.C.E.A.of BASF. After grinding surface treatment, the sintered component did with PVD surface treatment. And its roughness can go up to 0.6 μm. After PVD surface treatment, the component has good corrosion resistance. The components with this kind of material have non-magnetic, medium hardness and good ductility. And the Nickel-release-rate is much below the lim...