• banner-page

Metal Injection Molding

  • Mobile phone built-in bracket with good elasticity, good mechanical strength and good corrosion resistance

    Mobile phone built-in bracket with good elasticity, good mechanical strength and good corrosion resistance

    Product Introduction These are mobile phone built-in brackets, made from Metal Injection Molding (MIM) process with 17-4-PH stainless steel. These components did grinding surface treatment with natural color and its roughness can be less than 0.8μm. These components even have thin wall thickness but along with good elasticity, good mechanical strength and good corrosion resistance as well. • Application Filed: Consumer electronics • Molded material: 17-4PH • Post-sintering operation...
  • Mobile phone SIM tray with good insulativity and mechanical properties

    Mobile phone SIM tray with good insulativity and mechanical properties

    Product Introduction These are mobile phone SIM tray components, made from Metal Injection Molding (MIM) process with 17-4-PH stainless steel. After grinding surface treatment, the sintered component did with Teflon surface treatment and spray insulating oil. The good mechanical properties can ensure the SIM tray can have insertion and extraction repeatedly. The specific position of the component also has good insulativity since it has sprayed with insulating oil. • Application File...
  • Component of Unmanned aerial vehicle with good wear resistance and complex shape

    Component of Unmanned aerial vehicle with good wear resistance and complex shape

    Product Introduction This is a component of UAV(Unmanned Aerial Vehicle), made from Metal Injection Molding (MIM) process 420 stainless steel. And the component only did grinding surface treatment with natural color. We can see that the component have a very complicated shape. And the component also have good wear resistance and corrosion resistance. • Application Filed: Unknown • Molded material: 420W • Post-sintering operations: CNC machining, and Grinding. • Machining accuracy: ...
  • Interface component of SmartWatch Strap

    Interface component of SmartWatch Strap

    Product Introduction These are the interface components of SmartWatch Strap, made from Metal Injection Molding (MIM) process with 316L stainless steel. And the components have high density, the density after sintering can reach more than 98% of the original stainless steel plate. The components have excellent surface corrosion resistance, high wear resistance and high metal texture and excellent specular effects can also be achieved after secondary surface treatment.  Application Fi...
  • Component of automatic sewing machine with good ductility and corrosion resistance

    Component of automatic sewing machine with good ductility and corrosion resistance

    Product Introduction This is a component of automatic sewing machine, made from Metal Injection Molding (MIM) process 304L stainless steel. And the component only did grinding surface treatment with natural color. We can see that the component have a very complicated shape. And the component also have good ductility and corrosion resistance. • Application Filed: Textile Fittings • Molded material: 304L • Post-sintering operations: CNC machining, and Grinding. • Machining accuracy: ±...
  • Mobile phone Camera Deco with non-magnetic and good ductility

    Mobile phone Camera Deco with non-magnetic and good ductility

    Product Introduction These are mobile phone camera deco components, made from Metal Injection Molding (MIM) process with P.A.N.A.C.E.A.of BASF. After grinding surface treatment, the sintered component did with PVD surface treatment. And its roughness can go up to 0.6 μm. After PVD surface treatment, the component has good corrosion resistance. The components with this kind of material have non-magnetic, medium hardness and good ductility. And the Nickel-release-rate is much below the lim...
  • Door Latch with good corrosion resistance & mechanical properties

    Door Latch with good corrosion resistance & mechanical properties

    Product Introduction These are the door latch of the new energy vehicle, made from Metal Injection Molding (MIM) process with17-4-PH stainless steel. After grinding and polishing surface treatment, the sintered component did with PVD surface treatment and its roughness can up to 0.4μm. After PVD surface treatment, the component has good corrosion resistance. Meanwhile, the sintered components have good mechanical properties which can meet the frequent opening and closing requirements of ...
  • Component of Intelligence Lock with good mechanical strength, high hardness and good wear resistance

    Component of Intelligence Lock with good mechanical strength, high hardness and good wear resistance

    Product Introduction These are the components of Intelligence lock, made from Metal Injection Molding (MIM) process with Fe8NiMo50C. And the components did with heat treatment to ensure they can have good mechanical strength, high hardness and good wear resistance. • Application Filed: Industrial • Molded material: Fe8NiMo50C • Post-sintering operations: Grinding, Heat treatment, CNC machining. • Machining accuracy: ±0.1% to ±0.3% • Surface Roughness: 0.8μm • Salt spray test: ≥24hrs...